 |
 |
 |
|
IT IS HIGHLY RECCOMEDED YOU SELECT IN-STORE PICKUP TO COME IN A VERIFY YOU ARE GETTING THE CORRECT BELT SIZE. ALSO NOTE THE G-CODE OPERATOR BELTS WE SELL HAVE REVERSED VELCRO FROM THEIR STANDARD, MEANING THE MAIN OUTTER BELT HAS THE LOOP PORTION OF THE VELCRO STICHED INTERNALLY.
G-Codes Operators Belt is a dual belt system that incorporates a lightweight inner belt with outward facing loop pile. This inner belt is intended to be worn by weaving through the trouser belt-loops and secures with a low profile buckle. The inner belt can easily serve as a full function tactical belt all on its own. However, as part of the system the inner belt forms a comfortable and stable foundation for the load bearing 1 3/4 inch over-belt. The over- belt is lined with a mating hook material and secures, outside the trouser loops to the inner belt. Together they form a solid, comfortable, low profile, load bearing system. Additionally, this system combines with G-Codes new Static-Grip mounting accessories that lock the placement of your carry items to the belt.
Now users can choose the inner belt type that effectively works for them. Your options include the normal loop lined velcro belt system, which threads through your pants loops; or the new padded inner belt option, which comfortably sits on top of your pants.
When buying a belt, it is important to select the correct size based upon an accurate measurement. Your belt size is not the same as your pant or waist size; because your belt goes around you and your pants, tucked in shirt, and your underwear. Your belt size is usually 1 or 2 inches larger than your pant or waist size. G-CODE belts are primarily designed as an outer load bearing belt to carry your holster, magazine carriers, blow-out kit and any other essential items needed. G-CODE belts can also be worn in your belt loops just to hold your pants up. That in mind to get a proper measurement for your belt size using a tape measure, measure around what you will be wearing to determine what size belt you will need in inches. G-CODE Belts are measured by the actual usable length of the belt inside circumference, with a 4 inch adjustment parameter. Example a Large belt inside minimum circumference is 36 inches and can be adjusted out to 40 inches. If your measurement is between 36 and 40 inches you will need a Large.
|
|
|
 |
|
 |
|
|
|
