The 8Cr13Mov stainless blade is leaf-shaped and ground flat from spine to cutting edge for cutting performance. The blade’s shape coupled with an oversized Spyderco Round Hole and textured spine jimping allow you to open the blade and position your thumb on the spine in slip-proof confidence ready for work. A Walker Linerlock (with jimped liner) and a 4-way pocket clip lets you set your carry and draw preference: Tip-up/tip-down left-hand/right-hand. Screw together construction.

The 8Cr13Mov stainless blade is leaf-shaped and ground flat from spine to cutting edge for cutting performance. The blade’s shape coupled with an oversized Spyderco Round Hole and textured spine jimping allow you to open the blade and position your thumb on the spine in slip-proof confidence ready for work. A Walker Linerlock (with jimped liner) and a 4-way pocket clip lets you set your carry and draw preference: Tip-up/tip-down left-hand/right-hand. Screw together construction.

Their FRN (fiberglass reinforced nylon) handles come in new vibrant tones for 2010 including blue, green, brown (this knife), gray and purple. Molded onto the handle's surface is Bi-Directional Texturing® for slip-free tactile traction. Inside the handle are dual skeletonized stainless steel liners which strengthen the knife without additional weight and double as an anchor for external and internal components to attach through generating more sturdiness and rigidity.

The blades are full flat-ground VG-10 with a thinner highly refined cutting edge and a larger 13mm opening hole. Added to the blade’s spine is slip resistant jimping. Phosphor bronze washers smooth out the open/close action and the clip is upgraded to a four-way tip-up, tip-down, left-or right-handed clip.

Their FRN (fiberglass reinforced nylon) handles come in new vibrant tones for 2010 including blue, green, brown, gray (this knife) and purple. Molded onto the handle's surface is Bi-Directional Texturing® for slip-free tactile traction. Inside the handle are dual skeletonized stainless steel liners which strengthen the knife without additional weight and double as an anchor for external and internal components to attach through generating more sturdiness and rigidity.

The blades are full flat-ground VG-10 with a thinner highly refined cutting edge and a larger 13mm opening hole. Added to the blade’s spine is slip resistant jimping. Phosphor bronze washers smooth out the open/close action and the clip is upgraded to a four-way tip-up, tip-down, left-or right-handed clip.

Their FRN (fiberglass reinforced nylon) handles come in new vibrant tones for 2010 including blue, green (this knife), brown, gray and purple. Molded onto the handle's surface is Bi-Directional Texturing® for slip-free tactile traction. Inside the handle are dual skeletonized stainless steel liners which strengthen the knife without additional weight and double as an anchor for external and internal components to attach through generating more sturdiness and rigidity.

The blades are full flat-ground VG-10 with a thinner highly refined cutting edge and a larger 13mm opening hole. Added to the blade’s spine is slip resistant jimping. Phosphor bronze washers smooth out the open/close action and the clip is upgraded to a four-way tip-up, tip-down, left-or right-handed clip.

This knife is an evolutionary work in progress and the next level is here with the new Endura4. Now featuring screw construction to make cleaning and adjusting easier. The fiberglass reinforced nylon handles come molded with Bi-Directional Texturing® for preferred traction and improved ergonomics. Inside the handle dual skeletonized stainless steel liners make the knife stronger without adding weight and make an anchor for all external and internal components to attach through adding sturdiness and rigidity. Their VG-10 blades are flat saber-ground with a stronger tip and larger 13mm opening hole. Added to the blade’s spine is slip resistant jimping.

The Endura Trainer is identical in weight and size to the 'live' model. To enhance the balance of the piece, Spyderco has tapered the unsharpened tip and drilled holes through the blade, removing unnecessary bulk. Volcano grip texturing on both sides of the handle put the brakes on your hand slipping while training. All Spyderco training models have red handles designating them as non-sharpened.

The Delica Trainer is identical in weight and size to the 'live' model. To enhance the balance of the piece, Spyderco has tapered the unsharpened tip and drilled holes through the blade, removing unnecessary bulk. Volcano grip texturing on both sides of the handle put the brakes on your hand slipping while training. All Spyderco training models have red handles designating them as non-sharpened.

The T01 SpydeRench includes a real Spyderco knife with a locking full-sized, one-hand open/close knife blade and pocket clip, plus much more. Designed by an aerospace engineer in conjunction with Spyderco’s research and development department, the T01 is made of investment-cast 17-4ph corrosion resistant stainless steel and features an adjustable crescent wrench with an opening capacity of 9/16”. On the opposite end, a 2-setting slip joint plier fits comfortably in the hand that has been contour casted, no pinched fingers. A set of four screwdriver bits tuck deftly inside, including: a #2 and #3 Phillips-head as well as a #1 and #2 flat-head. The SpydeRench also accepts any standard 1/4" sized bit from your hardware store, including Allen and Torx®.

The tool also features a diamond-coated file featuring a concave, convex and flat sharpening surface with a small Phillips head on one side and a hole starter on the other end. A unique pivot pin allows the tool to rotate into an extended position that locks open creating a full-sized easy to grip screwdriver and crescent wrench. By releasing the pivot, the screwdriver and knife portion of the tool can separate from the crescent wrench allowing both tools to be used independently and/or simultaneously. AUS-8 premium stainless steel was chosen for the full-sized locking knife blade.

To create an even more subdued blade they have blackened the blade with a BodyCote black matte coating. Since the steel is the spirit of the knife, CPM-S30V seemed the logical choice for the blade given its reputation for long-term edge retention and rust resistance. The 'Millie' has a modified clip-point blade coated in non-reflective black then laser cut with a 14 mm Spyderco Round Hole for quick deployment and for use with gloves. Texturing above the hole hold the thumb in contact with the blade's spine during cutting for confident control over the sharpened edge. The handle scales are G-10 with the lock's liner nested (inlayed) directly into the scale, pumping up lock strength without the addition of bulky liners. Spacers between the scales create a gap running the handle's full length exposing the inside workings for inspection and cleaning. The handle flares slightly at the front end creating a finger choil and at the butt end, which keeps the knife from slipping forward or backward in the hand while sawing or making tough or aggressive cuts. A contoured black metal clip is set for right-hand tip-down carry.

To create an even more subdued blade they have blackened the blade with a BodyCote black matte coating. Since the steel is the spirit of the knife, CPM-S30V seemed the logical choice for the blade given its reputation for long-term edge retention and rust resistance. The 'Millie' has a modified clip-point blade coated in non-reflective black then laser cut with a 14 mm Spyderco Round Hole for quick deployment and for use with gloves. Texturing above the hole hold the thumb in contact with the blade's spine during cutting for confident control over the sharpened edge. The handle scales are G-10 with the lock's liner nested (inlayed) directly into the scale, pumping up lock strength without the addition of bulky liners. Spacers between the scales create a gap running the handle's full length exposing the inside workings for inspection and cleaning. The handle flares slightly at the front end creating a finger choil and at the butt end, which keeps the knife from slipping forward or backward in the hand while sawing or making tough or aggressive cuts. A contoured black metal clip is set for right-hand tip-down carry.